1. Configure a Siemens CPU 314C-2 PN/DP (314-6EH04-0AB0 V3.3) as another CPUÄ Chap. 13.3 ‘TIA Portal - Hardware configuration - CPU’ page 2962. Designate the station as "... DP slave".3. Integrate your modules according to your hardware configuration.4. Select the PROFIBUS interface of your CPU and select ‘Context menuè Properties’.ð The ‘Properties’ dialog is shown.5. Set at interface: Type "PROFIBUS".6. Connect to PROFIBUS and preset an address (e.g. 3).7. Switch at ‘Operating mode’ to "DP slave".8. Under ‘Assigned DP master’ , select your master system.9. Use ‘Transfer area’ to define the I/O address areas of the slave CPU that are to beassigned to the DP slave.10. Save, translate and transfer the respective project into the corresponding master orslave CPU.13.8 Deployment OPC UAÄ Chap. 7 ‘Deployment OPC UA’ page 183Configuration of the slavepartVIPA System SLIO Configuration with TIA PortalDeployment OPC UAHB300 | CPU | 013-CCF0R00 | en | 19-30 319
