12.6.2 Analog input12.6.2.1 Overviewn 2xUx12Bit (0 ... 10V)n Sub module ‘AI2’nÄ Chap. 5.3 ‘Analog input’ page 12012.6.2.2 Parametrization in SPEED7 Studio12.6.2.2.1 ‘I/O addresses’Sub module Input address Access AssignmentAI2 800 WORD Analog input channel 0 (X4)802 WORD Analog input channel 1 (X4)12.6.2.2.2 ‘Parameter’The analog input part has a filter integrated. The parametrization of the filter happens viathe parameter ‘Filter channel 0/1’ . The default value of the filter is 1000ms. The followingvalues can be entered:n 2ms: no filtern 100ms: small filtern 1000ms: medium filtern 10000ms: maximum filter12.6.3 Digital input12.6.3.1 Overviewn 16xDC 24Vn Sub module ‘DI16/DO12’nÄ Chap. 5.4 ‘Digital input’ page 12312.6.3.2 Parametrization in SPEED7 Studio12.6.3.2.1 ‘I/O addresses’Sub module Input address Access AssignmentDI16/DO12 136 BYTE Digital input I+0.0 ... I+0.7 (X4)137 BYTE Digital input I+1.0 ... I+1.7 (X4)12.6.3.2.2 ‘Inputs’Here you can specify a hardware interrupt for each input for the corresponding edge. Thehardware interrupt is disabled, if nothing is selected (default setting). A diagnostics inter-rupt is only supported with Hardware interrupt lost.‘Filtering channel 0/1’‘Trigger for processinterrupt’VIPA System SLIOConfiguration with VIPA SPEED7 StudioDeployment I/O periphery > Digital inputHB300 | CPU | 013-CCF0R00 | en | 19-30278
