12.5 SPEED7 Studio - Hardware configuration - I/O modules1. Click in the ‘Project tree’ at ‘PLC... > Device configuration’ .2. Starting with slot 1 place in the ‘Device configuration’ your System SLIO modulesin the plugged sequence. For this drag from the hardware catalog the corre-sponding module to the corresponding position in the Device configuration.For parametrization double-click in the ‘Device configuration’ on the module you want toparametrize. Then the parameters of the module are shown in a dialog. Here you canmake your parameter settings.By using the SFCs 55, 56 and 57 you may alter and transfer parameters for wantedmodules during runtime. For this you have to store the module specific parameters in socalled "record sets". More detailed information about the structure of the record sets is tofind in the according module description.12.6 Deployment I/O periphery12.6.1 Overviewn On this CPU the connectors for digital respectively analog signal and Technologicalfunctions are combined in a one casing.n Die Project engineering happens in the VIPA SPEED7 Studio as CPU 013-CCF0R00.n For parametrization of the digital I/O periphery and the technological functions thecorresponding sub modules of the CPU013-CCF0R00 are to be used.n The controlling of the operating modes of the technological functions happens bymeans of handling blocks of the user program.Hardware configuration ofthe modulesParametrizationParametrization duringruntimeProject engineering andparametrizationVIPA System SLIO Configuration with VIPA SPEED7 StudioDeployment I/O periphery > OverviewHB300 | CPU | 013-CCF0R00 | en | 19-30 277
