A System specific event IDsÄ Chap. 4.20 ‘Diagnostic entries’ page 117Event ID Description0x115C Manufacture interrupt (OB 57) for EtherCATOB: OB numberZINFO1: Input / Output addressZINFO2: Interrupt type0: Reserved1: Diagnostic interrupt (incoming)2: Process interrupt3: Pull interrupt4: Plug interrupt5: Status interrupt6: Update interrupt7: Redundancy interrupt8: Controlled by the supervisor9: Enabled10: Wrong sub module plugged11: Recovery of the sub module12: Diagnostic interrupt (outgoing)13: Cross traffic connection message14: Neighbourhood change message15: Synchronisation message (bus)16: Synchronisation message (device)17: Network component message18: Clock synchronisation message (bus)31: Pull interrupt component32: Vendor-specific interrupt min.33: Vendor-specific interrupt topology change127: Vendor-specific interrupt max.ZINFO3: CoE error codeDatID: InputDatID: Output0x38D0 Bus recovery0: OBPK: Priority classZINFO1: Logical address of the IO systemZINFO2: Logical address of the virtual deviceEvent IDsVIPA System SLIO System specific event IDsHB300 | CPU | 013-CCF0R00 | en | 19-30 325
