Yamaha 2014 MT-07 Service Manual

FEATURES1-9ABS warning lightThe ABS warning light “1” comes on to warn the rider if a malfunction in the ABS occurs.When the main switch is turned to “ON”, the ABS warning light comes on to check the electrical circuitand the system function (ABS self-diagnosis), and goes off when the vehicle is operated (the functioncheck is properly completed at a speed of about 6 to 10 km/h [3.8 to 6.3 mi/h]).TIPAfter all checks and servicing are completed, the ABS warning light will go off when the vehicle is riddenor pushed at a speed of 7 km/h (4 mi/h) or faster.NOTICEECA20950If the rear wheel is raced with the vehicle on a suitable stand, the ABS warning light may flashor come on. If this occurs, turn the main switch to “OFF”, then back to “ON”. The ABS operationis normal if the ABS warning light goes off after the vehicle starts off. If the fault codes are notdeleted, the ABS warning light goes off after the vehicle is ridden at a speed of about 30 km/h(19 mi/h).12217 3 7 458863. At low speed4. At high speed5. Wheel sensor6. Wheel sensor rotor7. Voltage8. Time