Yamaha 2014 MT-07 Service Manual

ELECTRICAL COMPONENTS8-133b. Turn the main switch to “ON”.c. Measure the turn signal/hazard relay outputvoltage.▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲EAS30795CHECKING THE RELAY UNIT (DIODE)1. Check:• Relay unit (diode)Out of specification → Replace.TIPThe pocket tester or the analog pocket testerreadings are shown in the following table.▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼a. Disconnect the relay unit coupler from thewire harness.b. Connect the pocket tester (Ω × 1) to the relayunit terminal as shown.Pocket tester90890-03112Analog pocket testerYU-03112-C• Positive tester probeBrown/white “1”• Negative tester probeGroundPocket tester90890-03112Analog pocket testerYU-03112-CContinuityPositive tester probeSky blue “1”Negative tester probeBlack/yellow “2”No continuityPositive tester probeBlack/yellow “2”Negative tester probeSky blue “1”ContinuityPositive tester probeSky blue “1”Negative tester probeBlue/red “3”No continuityPositive tester probeBlue/red “3”Negative tester probeSky blue “1”ContinuityPositive tester probeSky blue “1”Negative tester probeSky blue/white “4”No continuityPositive tester probeSky blue/white “4”Negative tester probeSky blue “1”ContinuityPositive tester probeBlue/green “5”Negative tester probeBlack/red “3”No continuityPositive tester probeBlack/red “3”Negative tester probeBlue/green “5”R/W L/W R/B R/LW/LL/W L/Y R/W L/G B/R B/Y Sb/WSb