Yamaha 2014 MT-07 Service Manual

SHIFT SHAFT5-62EAS30377CHECKING THE SHIFT SHAFT1. Check:• Shift shaft “1”Bends/damage/wear → Replace.• Shift shaft spring “2”• CollarDamage/wear → Replace.EAS30378CHECKING THE STOPPER LEVER1. Check:• Stopper lever “1”Bends/damage → Replace.Roller turns roughly → Replace the stopperlever.EAS30381INSTALLING THE SHIFT SHAFT1. Install:• Bearing “1”• Oil seal “2”TIP• Apply engine oil onto the bearing.• Make sure that the bearing does not protrudepast the line “b” shown in the illustration.• Lubricate the oil seal lips with lithium-soap-based grease.2. Install:• Shift shaft spring stopper• Washer• Shift shaft assembly• Stopper lever springTIP• Hook the end of the shift shaft spring “2” ontothe shift shaft spring stopper “1”.• Hook the ends of the stopper lever spring “3”onto the stopper lever “4” and the stopper leverspring hook “5”.• Mesh the stopper lever with the shift drum seg-ment assembly.Install depth “a”0.6–1.1 mm (0.02–0.04 in)211NewT R..Shift shaft spring stopper22 Nm (2.2 m·kgf, 16 ft·lbf)LOCTITE®1b2aNew12534