Yamaha 2014 MT-07 Service Manual

THROTTLE BODIES7-17c. Connect the pressure gauge “3” and adapter“4” to the fuel hose “2”.d. Start the engine.e. Measure the fuel pressure.Faulty → Replace the fuel pump.▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲3. Install:• Fuel tankRefer to “FUEL TANK” on page 7-1.• Fuel tank front cover• Fuel tank center cover• Fuel tank cover (left)• Fuel tank cover (right)• Fuel tank top coverRefer to “GENERAL CHASSIS (4)” on page4-11.• Rider seatRefer to “GENERAL CHASSIS (1)” on page4-1.EAS30937INSTALLING THE THROTTLE BODY JOINTS1. Install:• Throttle body joints “1”TIPBe sure to install the throttle body joints “1” asshown in the illustration.EAS31092INSTALLING THE AIR FILTER CASE1. Install:• Air filter case joint clamps “1”TIP• Align the projection “a” on the air filter case jointwith the slot “b” in the air filter case joint clamp.• Face the screw head “c” of the air filter casejoint clamp outward.Pressure gauge90890-03153Pressure gaugeYU-03153Fuel pressure adapter90890-03176Fuel pressure adapterYM-03176Fuel line pressure at idling300–390 kPa (3.0–3.9 kgf/cm²,43.5–56.6 psi) / Regulated pres-sure 324 kPa (3.2 kgf/cm², 47.0psi)T R. .Rear fuel tank bracket bolt10 Nm (1.0 m·kgf, 7.2 ft·lbf)2423T R..Throttle body joint clamp screw3.0 Nm (0.30 m·kgf, 2.2 ft·lbf)a. #1 cylinderb. #2 cylinderA. LeftB. RightT R. .Air filter case joint clamp screw3.0 Nm (0.30 m·kgf, 2.2 ft·lbf)A B45˚ 70˚b1a