Yamaha 2014 MT-07 Service Manual

ELECTRIC STARTING SYSTEM8-9EAS30494STARTING CIRCUIT CUT-OFF SYSTEM OPERATIONIf the main switch is turned to “ON” and the “ ” side of the start/engine stop switch is pushed, the startermotor can only operate if at least one of the following conditions is met:• The transmission is in neutral (the neutral circuit of the gear position switch is closed).• The clutch lever is pulled to the handlebar (the clutch switch is closed) and the sidestand is up (thesidestand switch is closed).The starting circuit cut-off relay prevents the starter motor from operating when neither of these condi-tions has been met. In this instance, the starting circuit cut-off relay is open so current cannot reach thestarter motor. When at least one of the above conditions has been met, the starting circuit cut-off relayis closed and the engine can be started by pressing the “ ” side of the start/engine stop switch.121114 6 666 ab 86975231010a. WHEN THE TRANSMISSION IS INNEUTRALb. WHEN THE SIDESTAND IS UP AND THECLUTCH LEVER IS PULLED TO THEHANDLEBAR1. Battery2. Main fuse3. Main switch4. Ignition fuse5. Starting circuit cut-off relay6. Relay unit (diode)7. Clutch switch8. Sidestand switch9. Gear position switch10. Start/engine stop switch11. Starter relay12. Starter motor