Description of application and parametersApplication "RTC"Product manual 2CKA001473B9679 │10711.4.42 Basic stage coolingNoteOnly available when the "Extended settings" parameter under "Cooling control"is set on "Yes".11.4.43 Basic stage cooling — Status object coolingOptions: NoYesThis parameter enables the "Status cooling" communication object.11.4.44 Basic stage cooling — Mode of the control valueOptions: NormalInverseThe mode of the control value can be used to adapt the control value to de-energised opened(normal) or de-energised closed (inverse) valves.– Normal: Value 0 means "Valve closed".– Inverse: Value 0 means "Valve open".11.4.45 Basic stage heating - Control value difference for sending of heating control valueOptions: 2%5%10%Send cyclic onlyThe control values of the 0 - 100% PI continuous controller are not transmitted after everycalculation. Instead, they are transmitted when the calculation results in a value that is differentenough to the previous sent value to make a transmission meaningful. This value differencecan be entered here.NoteThis parameter is only available when "Control value type" parameter is seteither on "PI continuous, 0 – 100%,"PI PWM, On/Off“ or "Fan coil".
