Description of application and parametersApplication "Function block x"Product manual 2CKA001473B9679 │21111.7.3 Application - 1-button switchingThe application makes it possible to switch a light via a button.The following communication object is available:■ "Sx: switching"The application can differentiate between the press and the releasing of a button. Whenactuated and released a switching telegram is sent out each time.In each case, the application makes a separate set of parameters and communication objectsavailable in function block x for both buttons. The second button of each function block can beoccupied with an additional button function.NoteThe parameters for application "1-button switching" can be called up via generalparameters.NoteThe number (S1 - Sx) of the object depends on the function block and the buttonnumber.11.7.3.1 Reaction on rising edgeOptions: DeactivatedOffOnAlternating on/off■ Deactivated:– No telegram is sent at the press of the button.■ Off:– The "Off" telegram is sent at the press of the button (at rising edge).■ On:– The "On" telegram is sent at the press of the button (at rising edge).■ Alternating on/off:– "On" and "Off" are sent alternately at the press of the button.Application "1-button value switching" can differentiate between the press and the releasing ofthe button. A press is defined as "Rising edge" and the releasing as "Falling edge".The parameter is used to specify whether an On or Off telegram is sent on the bus at a risingedge via the 1-bit communication object "Sx: switching". A further option can be specified as towhether the switching telegrams are sent alternately. This means that after "On" is sent, "Off" issent at a renewed press of the button. After it is pressed again, "On" is sent.
