Description of application and parametersApplication "Function block x"Product manual 2CKA001473B9679 │22811.7.7.3 Object typeOptions: 1 bit1 byte 0 - 100%■ 1 bit:– The value is sent as 1-bit switching commands (up/down or adjustment).■ 1 byte 0 - 100%:– The value is sent as 1-byte value without a sign (position in percent).The parameter is used to set the size of communication objects for the control of blinds. Forselection "1 bit", objects "Sx: moving" and "Sx: adjusting" are available. For selection "1 byte 0-100%", objects "Sx: position" and "Lx: slat position" are available.If option "1 byte 0-100%" is selected, communication objects can be connected with 1-byteposition objects of the blind actuators. Also desired positions of the blind can be preset underExtended parameters.Example: Button 1 always moves the blind down to 50%, with the slats closed at 50%. Button 1always moves the blind down to 80%, with the slats closed at 100%.NoteThe parameter can only be set if the "Blind/roller blind function switchover"parameter is set on "Blind".11.7.7.4 Function switchover blinds/roller blindsOptions: BlindRoller blind■ Blind:– The application is fixed on blind control.■ Roller blind:– The application is fixed on roller blind control.The parameter is used to specify whether the sensor or the selected button can be used for ablind or a roller blind control.NoteIf the "Blind" function is selected and parameter "Object type" is fixed on "1 byte0-100%", the following parameters are available.
