Description of application and parametersApplication "Function block x"Product manual 2CKA001473B9679 │27711.7.20 Application - LED functionThe application can be used to configure the button LEDs for the status or function display.The following communication objects are available:■ "Lx: Status LED"■ "Lx: Day/night mode"■ "Lx: Alarm"■ "Lx: Scene storage"The LED of button x can light up with two different colours and brightness levels. The LED canalso flash for alarm display and/or scene storage display.In each case, the application makes a separate set of parameters and communication objectsavailable in function block x for both LEDs. The second button of each function block can beoccupied with an additional button function.NoteThe parameters for application "LED function" can be called up in each functionblock via general parameters and extended parameters.NoteThe number (S1 - Sx) of the object depends on the function block and the buttonnumber.11.7.20.1 Operating modeOptions: Status illuminationFunction illumination■ Status illumination:– The LED displays the device status with different colours.■ Function illumination:– The LED displays the device functions with different colours.The parameter is used to specify whether the LED displays the current device status or theselected device function with a colour.If the operating mode "Status illumination" is selected, the LED has the 1-bit or 1-bytecommunication object "Lx: status LED". If a telegram is received via the status object, the LEDlights up in the colour of the received value.If operating mode "Function illumination" is selected, the colour for the configured buttonfunction (e.g. light, blind or scene) can be firmly set via parameter "Colour of functionillumination".
