Description of application and parameters"Relative humidity" applicationProduct manual 2CKA001473B9679 │17911.6.7 Relative humidity - ComponentOptions: Include in calculation at 10%Include in calculation at 20%Include in calculation at 30%Include in calculation at 40%Include in calculation at 50%Include in calculation at 60%Include in calculation at 70%Include in calculation at 80%Include in calculation at 90%Only use external measured valueThe share of the weighting of and external measured value integrated through a KNXcommunication object is defined using this parameter.NoticeThe parameter is available only when parameter "External measured value" isset on "Active".11.6.8 Relative humidity controller - Controller typeOptions: InactiveSingle-stageTwo-stageThree-stagePIThe control type for actuating the external fan is defined using this parameter.11.6.9 Relative humidity — Permit change of the basic set value via busOptions: NoYesThe basic set value defined for the first threshold can be optimised via the KNX bus, e.g.,through a visualisation.
