Description of application and parametersApplication "RTC"Product manual 2CKA001473B9679 │11311.4.54 Control of additional cooling stage — P-component (min)Options: Setting option between 0 - 255The I-component refers to the reset time of a control. The integral component has the effect ofmoving the room temperature slowly toward, and to ultimately reaching, the setpoint. Dependingon the type of system used, the reset time has to have different values. In general, the moreinactive the overall system, the greater the reset time.NoteThis parameter is only available when "Control value type" parameter is seteither on "PI continuous, 0 – 100%", "PI PWM, On/Off“ or "Fan coil". In addition,the "Cooling type" parameter must be set on "Free configuration".11.4.55 Control of additional cooling stage - Temperature difference to basic stage (x 0.1°C)Options: Setting option between 0 - 255The setpoint temperature of the additional stage is defined as a function of the current setpointtemperature of the base stage and is expressed as a difference. The value represents thesetpoint value starting at which the additional stage will operate.11.4.56 Control of additional cooling stage — Extended settingsOptions: NoYesThis parameter enables additional functions and communication objects, e.g. "Additional coolingstage".
