Description of application and parametersApplication "RTC"Product manual 2CKA001473B9679 │12611.4.6 Setpoint adjustmentNoteThis parameter is only available if the "Device function" parameter is set oneither "Single device" or "Master device".11.4.7 Setpoint adjustment — Maximum manual increase during heating mode (0 - 9°C)Options: Setting option between 0 - 9This preset can be used to limit the manual increase during heating.NoteThis parameter is only available when parameter "Controller function" is set on"Heating" and parameter "Control value type" on "2-point 1 bit, On/Off" or "2-point 1 byte, 0/100%".11.4.8 Setpoint adjustment — Maximum manual reduction during heating mode (0 - 9°C)Options: Setting option between 0 - 9This preset can be used to limit the manual decrease during heating.NoteThis parameter is only available when parameter "Controller function" is set on"Heating" and parameter "Control value type" on "2-point 1 bit, On/Off" or "2-point 1 byte, 0/100%".11.4.9 Setpoint adjustment — Maximum manual increase during cooling mode (0 - 9°C)Options: Setting option between 0 - 9This preset can be used to limit the manual increase during cooling.NoteThis parameter is only available when the "Control function" parameter is set on"Cooling," "Cooling with additional stage," "Heating and cooling" or "Heating andcooling with additional stages".
