Communication objectsCommunication objectsProduct manual 2CKA001473B9679 │374NoticeThe communication objects regarding the channels (general functions) appear inthe same sequence depending on the parameterization.– Only one sequence is explicitly presented in the following.– The individual channels are differentiated with channel numbering (e.g. GF1,etc.).– The same applies to the numbering of the inputs.12.1.122 Cyclic telegrams — EnableName Object function Data typeGFx: Enable Input 1.001 SwitchingThe function "Cyclic telegram" can be temporarily blocked or enabled via the 1-bitcommunication object.12.1.123 Priority - Switching inputName Object function Data typeGFx: Switching input Input 1.001 SwitchingThe switching telegrams received via the 1-bit communication object are transmitted to object"GFx: Output" depending on thestate of the "GFx: Priority input" object.12.1.124 Priority - Input priorityName Object function Data typeGFx: Input priority Input 2.001 Switching priorityThe values 0, 1, 2 and 3 can be received via the 2-bit communication object. Each valuetriggers a specific forced operation of object "GFx: Output".12.1.125 Priority - OutputName Object function Data typeGFx: Output Output 1.001 SwitchingThe telegrams received via communication object "GFx: Switching input" are transferred toobject "GFx: Output" depending on the state of the "GFx: Input priority" object.
