Description of application and parametersApplication "Function block x"Product manual 2CKA001473B9679 │22111.7.5.2 Working mode of the buttons for switchingOptions: DeactivatedOffOnAlternating on/off■ Deactivated:– No command is sent at the press of the button.■ Off:– The "Off" command is sent at the press of the button.■ On:– The "On" command is sent at the press of the button.■ Alternating on/off:– "On" and "Off" are sent alternately at the press of the button.The parameter is used to specify whether an On or an Off command is sent on the bus via 1-bitcommunication object "Sx: switching" when the button is pressed.A further option can be specified as to whether the switching commands are sent alternately.This means that after "On" is sent, "Off" is sent at a renewed press of the button. After it ispressed again, "On" is sent.11.7.5.3 Working mode of the buttons for dimmingOptions: DarkerBrighterAlternating brighter/darker■ Darker:– The "Dim darker" command is sent at a long press of the button.■ Brighter:– The "Dim brighter" command is sent at a long press of the button.■ Alternating brighter/darker:– "Dim darker" and "Dim brighter" are sent alternately at a long press of the button.The parameter is used to specify whether a telegram with the "Dim brighter" or "Dim darker"command is sent on the bus via the 3-bit communication object "Sx: relative dimming" at a longpress of the button.A further option can be specified as to whether the dimming telegrams are sent alternately ateach long press of the button. This means that after "Dim brighter" is sent, "Dim darker" is sentat a renewed press of the button. After it is pressed again, "Dim brighter" is sent.
