Description of application and parametersApplication "Function block x"Product manual 2CKA001473B9679 │22411.7.6.3 Working mode of the buttonsOptions: 1st button Up / 2nd button Down1st button Down / 2nd button Up■ 1st button Up / 2nd button Down:– When the first button is pressed the "Up" command is sent and the "Down" commandwhen the second button is pressed.■ 1st button Down / 2nd button Up:– When the first button is pressed the "Down" command is sent and the "Up" commandwhen the second button is pressed.The parameter is used to specify whether the first or second button triggers the "Up" or "Down"movement command.11.7.6.4 Value for position down (%)Options: Setting option from 0 to 100 (%)The parameter is used to set the position to which a linked blind is to be lowered. Theassociated 1-byte communication object "Sx: position" must hereby be connected with a 1-byteposition object of the blind actuator.Percentage values can be set in steps of 1%. Meaning of the percentage values:■ 0% = blind completely raised.■ 100% = blind completely lowered.NoteThe parameter is only adjustable if the "object type" parameter is set to "1 byte 0- 100%".11.7.6.5 Value for position up (%)Options: Setting option from 0 to 100 (%)The parameter is used to set the position to which a linked blind is to be raised. The associated1-byte communication object "Sx: position" must hereby be connected with a 1-byte positionobject of the blind actuator.Percentage values can be set in steps of 1%. Meaning of the percentage values:■ 0% = blind completely raised.■ 100% = blind completely lowered.NoteThe parameter is only adjustable if the "object type" parameter is set to "1 byte 0- 100%".
