Chapter 7 Servo Parameters7-80 Revision June 2010Refer to P4-11 for explanation.Please note that when P2-08 is set to 10, the users cannot reset this parameter.P4 - 14 TOF2 Analog Torque Drift Adjustment 2 Address: 041AH, 041BHDefault: Factory setting Related Section: N/AApplicable Control Mode: ALLUnit: N/ARange: 0 ~ 32767Data Size: 16-bitDisplay Format: DecimalSettings:Refer to P4-11 for explanation.Please note that when P2-08 is set to 10, the users cannot reset this parameter.P4 - 15 COF1 Current Detector Drift Adjustment (V1phase) Address: 041EH, 041FHDefault: Factory setting Related Section: N/AApplicable Control Mode: ALLUnit: N/ARange: 0 ~ 32767Data Size: 16-bitDisplay Format: DecimalSettings:Refer to P4-11 for explanation.Please note that when P2-08 is set to 10, the users cannot reset this parameter.P4 - 16 COF2 Current Detector Drift Adjustment (V2phase) Address: 0420H, 0421HDefault: Factory setting Related Section: N/AApplicable Control Mode: ALLUnit: N/ARange: 0 ~ 32767Data Size: 16-bitDisplay Format: DecimalSettings:Refer to P4-11 for explanation.Please note that when P2-08 is set to 10, the users cannot reset this parameter.
