Eaton PowerXL DX-NET-SWD Manual

1 Device series1.4 Maintenance and inspectionDX-NET-SWD 06/13 MN04012009Z-EN www.eaton.com 111.4 Maintenance and inspectionObserving the general rated operational data and when considering the spe-cific technical data, the SmartWire-DT interface card SWD3 is maintenance-free. However, external factors can influence the components’s lifespan andfunction.A replacement or repairing of the SmartWire-DT interface card SWD3 is notintended. If the card is damaged by external influences, repair is not possible.1.5 StorageIf the SmartWire-DT interface card DX-NET-SWD3 is stored before use,suitable ambient conditions must be ensured at the site of storage:• Storage temperature: -40 - +85 °C,• Relative average air humidity: < 95 %, no condensation permitted.1.6 Service and warrantyContact your local sales partner if you have a problem with your EatonSmartWire-DT interface card SWD3.When you call, have following data ready:• the exact part no. (= DX-NET-SWD3),• the date of purchase,• an accurate description of the problem that has occurred in conjunctionwith the SmartWire-DT interface card DX-NET-SWD3.Information concerning the guarantee can be found in the Terms andConditions Eaton Industries GmbH.24-hour hotline: +49 (0)1805 223 822Email: AfterSalesEGBonn@Eaton.com1.7 DisposalThe SmartWire-DT interface card DX-NET-SWD3 can be disposed of as elec-tronic scrap in accordance with the currently applicable national guidelines.Dispose of the device according to the applicable environmental laws andprovisions for the disposal of electrical or electronic devices.￫ The SmartWire-DT interface card DX-NET-SWD3 is not a house-hold appliance, it is a component only intended to be used forcommercial purposes.￫ Observe the technical data and connection requirementsdescribed in this manual. Any other usage constitutes improperuse.