Eaton PowerXL DX-NET-SWD Manual

3 Installation3.3 Install SmartWire-DT connection20 DX-NET-SWD 06/13 MN04012009Z-EN www.eaton.com3.3 Install SmartWire-DT connectionThe connection of the SmartWire-DT is carried out via the 8-pin externaldevice plug SWD4-8SF2-5.Figure 9: Configuration of the SmartWire-DT flat band conductor3.3.1 SmartWire-DT connectionConnect the SWD external device plug SWD4-8SF2-5 with the adaptedSmartWire-DT ribbon cable.Figure 10: Connecting the SmartWire-DT external device plug with the adapted ribbon cableMeaning+24 V DC Contactor control voltageChassisgroundContactor control voltageGND for device supply voltage and data cableData B Data cable BData A Data cable AGND for device supply voltage and data (data A, data B)SEL Select cable for automatic addressing of the SmartWire-DTmodules+15 V DC Device supply voltageNOTICEDo not install the SWD4-8SF2-5 SmartWire-DT external deviceplug without switching off the supply and control voltages first!L1/L L2/N L3U V W8 9 10 11ReadyIOASWD4-8SF2-5+ 15VSWD4-8SF2-5+ 15VSWD4-8SF2-5SWD4-100LF8-24SWD4-3LF8-24-2SSWD4-5LF8-24-2SSWD4-10LF8-24-2S12