Eaton PowerXL DX-NET-SWD Manual

0 About this Manual0.1 Target groupDX-NET-SWD 06/13 MN04012009Z-EN www.eaton.com 30 About this ManualIn this manual, you will find the special information that you need to link aSmartWire-DT interface card DX-NET-SWD3 with a variable frequency driveof series DC1 and adapt it to its required settings with the aid of the parame-ters. The information refers to the specified hard and software versions.0.1 Target groupThe content of MN04012009Z-EN manual is written for electrical engineersand automation technicians. A specialist knowledge of electrical engineeringand fundamental technical principles is needed for commissioning. In addi-tion you should be familiar with the handling of the SmartWire-DT system.0.2 Further manuals for this deviceFurther information can be found in the following manuals:On the topic “Variable frequency drive“• „DC1 – MN04020003Z-ENOn “SmartWire-DT“• “SmartWire-DT The system“ – MN05006002Z-EN(previous designation AWB2723-1617en)• “SmartWire-DT module“ – MN05006001Z-EN(previous designation AWB2723-1613en)• “SmartWire-DT Gateways“ – MN05013002Z-EN(previous designation AWB2723-1612en)0.3 Sources[1] Profile Drive Technology, PROFIdrive Technical Specification forPROFIBUS and PROFINET, Version 4.1, May 2006; Order No: 3.172￫ The above mentioned manuals and further information can befound in the internet:http://www.eaton.com/moeller ￫ Support