M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D EServer EnabledMagnum6K25 (syslog)## show syslogSysLog Status: DisabledServer ID: 2SysLog Server Host : 192.168.5.98Server Logging : EnabledLog Events : warnLocal Log Events : DefaultMagnum6K25 (syslog)## syslog enableSysLog EnabledMagnum6K25 (syslog)## show syslogSysLog Status: EnabledServer ID: 2SysLog Server Host : 192.168.5.98Server Logging : EnabledLog Events : warnLocal Log Events : DefaultMagnum6K25 (syslog)## exitMagnum6K25#FIGURE 66 – Show log and clear log command. Note the logs are in the syslog format. The syslogcommands are also displayedThe log shows the most recent event at the top of the listing. If the log is filled when the switchdetects a new event, the oldest entry is dropped off the listing.As discussed in the prior section, any port can be set to monitor security as well as make alog of the events that take place. The logs for the events are stored on the switch. Whenthe switch detects an event on a port, it sets an “alert flag” for that port and makes theevent information available.The default log size is 50 rows. To change the log size, use the “setlogsize” command.When the switch detects an intrusion attempt on a port, it records the date and timestamp, the MAC address, the port on which the access was attempted and the action takenby MNS-6K software. The event log lists the most recently detected security violation101
