M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D ESystem Contact : support@garrettcom.comSystem Location : Fremont, CASystem ObjectId : 1.3.6.1.4.1.553.12.6Magnum6K25#FIGURE 31 - System parameters using the show setup command. Most parameters here cannot bechangedMagnum6K25# show sysconfigSystem Name : Magnum6K25System Contact : support@garrettcom.comSystem Location : HO, Fremont, CABoot Mode : manualInactivity Timeout(min) : 10Address Age Interval(min) : 300Inbound Telnet Enabled : YesWeb Agent Enabled : YesTime Zone : GMT-08hours:00minutesDay Light Time Rule : USASystem UpTime : 7 Days 12 Hours 30 Mins 46 SecsMagnum6K25#FIGURE 32 - System parameters using the show sysconfig command. Most parameters here can bechanged.System variables can be changed. Below is a list of system variables which GarrettComrecommends changing.System Name: Using a unique name helps you to identify individual devices in anetwork.System Contact and System Information: This is helpful for identifying theadministrator responsible for the switch and for identifying the locations of individualswitches.To set these variables, change the mode to be SNMP configuration mode from themanager mode.Syntax snmpSyntax setvar [sysname|syscontact|syslocation]= where string is a characterstring, maximum 24 characters long51
