M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E270$$ : $ Character$r : New Line$b : SpaceA f ow the system prompt can be setup is shown below.6K25# snmpew examples on hMagnumMagnum6K25(snmp)## setvar sysname=CoreSystem variable(s) set successfullyMagnum6K25(snmp)## exitMagnum6K25# set prompt $nCore# set prompt $n$b$iCore 192.168.5.5# set prompt $n$b$i$bCore 192.168.5.5 # snmpCore 192.168.5.5 (snmp)## setvar sysname=Magnum6K25System variable(s) set successfullyCore 192.168.5.5 (snmp)## exitCore 192.168.5.5 # set prompt $b$b$i$b192.168.5.5 # set prompt $n$b$i$bMagnum6K25 192.168.5.5 #Magnum6K25 192.168.5.5 #Magnum6K25 192.168.5.5 #Magnum6K25 192.168.5.5 # set prompt Some$bthing$iSome thing192.168.5.5# set prompt Some$bthing$b$iSome thing 192.168.5.5#FIGURE 142 – Setting custom promptsPinPing command can be used from MNS-6K to test connectivity to other devices as well asif the IP address is setup correctly. The command isipaddress> [count=<1-999>] [timeout=<1-256>] – use the ping command to testagnum6K25# ping 67.109.247.202gchecking to seeSyntax ping <connectivityM67.109. live, count 1, time = 40ms247.202 is aMagnum6K25# ping 67.109.247.202 count=367.109.247.202 is alive, count 1, time = 20ms67.109.247.202 is alive, count 2, time = 20ms67.109.247.202 is alive, count 3, time = 40msMagnum6K25#
