M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E237Magnum6K25(gvrp)## set-forbid vlan=2 forbid=11-15Magnum6K25(gvrp)## show-forbid============================================VLAN ID | FORBIDDEN PORTS========= ======================= ============1 | None2 | 11, 12, 13, 14, 15FIGURE VRP configuration ex133 – G ampleGVRP Operations NotesA dynamic VLAN must be converted to a static VLAN before it can have an IP address.fter converting a dynamic VLAN to a static VLAN use the “save” command to save theithin the same broadcast domain, a dynamic VLAN can pass through a device that is notVRP assigns dynamic VLANs as tagged VLANs. To configure the VLAN as untagged, firstebooting a switch with a dynamic VLAN deletes that VLAN. However, the dynamic VLAN re-y receiving advertisements from other devices running GVRP, the switch learns of staticGVRP-enabled switch does not advertise any GVRP-learned VLANs out of the port(s) onAchanges made – on a reboot the changes can be lost without the save command.WGVRP-aware. This is because a hub or a switch that is not GVRP-aware will flood the GVRP(multicast) advertisement packets out all ports.Gconvert the tagged VLAN to a static VLAN.Rappears after the reboot if GVRP is enabled and the switch again receives advertisements for thatVLAN through a port configured to add dynamic VLANs.BVLANs from those devices and dynamically (automatically) creates tagged VLANs on the links tothe advertising devices. Similarly, the switch advertises its static VLANs to other GVRP-awaredevices.Awhich it originally learned of those VLANs.
