M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D EVersion : Magnum 6K25 build 14.1 Jul 28 2008 07:51:45MAC Address : 00:20:06:25:b7:e0IP Address : 192.168.1.150Subnet Mask : 255.255.255.0Gateway Address : 192.168.1.10CLI Mode : ManagerSystem Name : Magnum6K25System Description : 25 Port Modular Ethernet SwitchSystem Contact : support@garrettcom.comSystem Location : Fremont, CASystem ObjectId : 1.3.6.1.4.1.553.12.6Magnum6K25# show sysconfigSystem Name : Magnum6K25System Contact : support@garrettcom.comSystem Location : HO, Fremont, CABoot Mode : manualInactivity Timeout(min) : 10Address Age Interval(min) : 300Inbound Telnet Enabled : YesWeb Agent Enabled : YesTime Zone : GMT-08hours:00minutesDay Light Time Rule : USASystem UpTime : 36 Days 7 Hours 49 Mins 48 SecsMagnum6K25#FIGURE 6 - Viewing the basic setup parameters. You can use ‘show setup’ or ‘show sysconfig’ to viewsetup parametersSome of the parameters in the Magnum 6K family of switches are shown above. The listof parameters below indicates some of the key parameters on the switch and therecommendations for changing them (or optionally keeping them the same).Privilege levelsTwo privilege levels are available - Manager and Operator. Operator is at privilege level1 and the Manager is at privilege level 2 (the privilege increases with the levels). Forexample, to set up a user for basic monitoring capabilities use lower number or operatorlevel privilege (Level 1)The Manager level provides all Operator level privileges plus the ability to performsystem-level actions and configuration commands. To select this level, enter the ‘enable’ command at the Operator level prompt and enter the Manager password,when prompted.Syntax enable For example, switching from an Operator level to manager level, using the ‘enable’29
