M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D ESubsystem Description SeverityTCP/IP Duplicate IP a.b.c.d sent from MAC address XXXXXX CTCP/IP Unable to allocate memory for an ICMP packet CTCP/IP IP packet from a.b.c.d , with checksum error dropped DTCP/IP Bad IP fragments from a.b.c.d dropped DTCP/IP UDP checksum error in the received packet a.b.c.d DTCP/IP TCP checksum error in the received packet a.b.c.d DTCP/IP ICMP checksum error in the received packet DTCP/IP Failed to initialize the interface x FTCP/IP IP packet of version X is dropped IVLAN Type set to port IVLAN Type set to mac IVLAN Type set to tag IVLAN Type set to none IVLAN Pvlan: port based vlan started IVLAN Pvlan: default vlan is modified IVLAN Tvlan: Tag based vlan started IVLAN pvlan:vlan X enabled IVLAN pvlan:vlan X disabled IVLAN pvlan:vlan X deleted IVLAN pvlan:port based VLAN started IVLAN pvlan:port based VLAN stopped IVLAN pvlan:default vlan is modified IVLAN tvlan:vlan X deleted IVLAN tvlan:vlan X enabled IVLAN tvlan:vlan X disabled IVLAN tvlan:tag based VLAN stopped IVLAN tvlan:tag based VLAN started IFIGURE 147 – Listing of severity - sorted by subsystem and severityPlease refer to the related chapters in this manual to find more information. For example, for theVLAN subsystem, refer to the chapter on VLAN.MAC Address TableSyntax show address-table – displays the MAC addresses associated with ports – shows the MAC addresseson the ports and displays to which port the packet with the specified MAC addresses will be switched toSometimes it is useful to see which port a specific packet will be switched to by examining theinternal MAC address table. The ‘show address-table’ command displays the internal switchingtable.277
