M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E75Magnum6K25# ipconfig ip=fe80::220:6ff:fe25:ed80 mask=ffff:ffff:ffff:ffff::Action Parameter Missing. "add" assumed.IPv6 Parameters Set.Magnum6K25# show ipv6IPv6 Address : fe80::220:6ff:fe25:ed80 mask : ffff:ffff:ffff:ffff::Magnum6K25# show ipconfigIP Address : 192.168.5.5Subnet Mask : 255.255.255.0Gateway Addr : 192.168.5.1essIPv6 Address : fe80::220:6ff:fe25:ed80 mask : ffff:ffff:ffff:ffff::IPv6 Gateway : ::Magnum6K25#F figuring IPv6n addition to the commands listed above, the commands which support IPv6 addressing areyntax ftp - ftp to an IPv6 stationExample – ftp fe80::220:6ff:fe25:ed80yntax telnet - telnet to an IPv6 stationExample – telnet fe80::220:6ff:fe25:ed80Besides, if the end station supports IPv6 addressing (as most Linux and Windows systems do),http://fe80::220:6ff:fe25:ed80IGURE 50 – ConISSone can access the switch using the IPv6 addressing as shown in the example belowList of commands in this chapterSyntax ipconfig [ip=] [mask=] [dgw=][add|del] – configure and IPv6 address. The add/delete option can be used to add or deleteIPv4/IPv6 addresses– diSyntax show ipconfig splay the IP configuration information – including IPv6 addressntionSyntax ping6 - pings an IPv6 stationSyntax show ipv6 - displays the IPv6 informationSyntax ftp - ftp to an IPv6 statioSyntax telnet - telnet to an IPv6 sta
