M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D Eto 5 users to be added. Right now, the MNS-6K agent only support noauth and auth-md5 for v3authentication and auth-des for priv authenticationSyntax show-user [id=] - display all or specific view entries - id is optional and is the numbercorresponding to the view entry number in the tableSyntax rmon – enter the RMON configuration mode to setup RMON groups and communitiesSyntax history def-owner= def-comm= - define the RMON history group and thecommunity string associated with the groupSyntax statistics def-owner= def-comm=- define the RMON statistics group andthe community string associated with the groupSyntax alarm def-owner= def-comm= - define the RMON alarm group and thecommunity string associated with the groupSyntax event def-owner= def-comm= - define the RMON event group and thecommunity string associated with the groupSyntax show rmon - list the specific RMON data as defined by the grouptypeChapter 21 – MiscellaneousCommandsSyntax alarm – enter the alarm configuration modeSyntax add event= - enables alarm action in response to the specified event IDSyntax period time=<1..10> - sets the duration of relay action for the momentary type signal. This may beneeded to adjust to the behavior of the circuit or relay. Default is 3 seconds. Time is in secondsSyntax del event= - disables alarm action in response to the specified event IDSyntax alarm - globally enables or disables the alarm actionSyntax show alarm - displays the current status of Alarm systemSyntax set motd – after the command is typed, MNS allows you to enter the Banner messageSyntax show motd – displays the current message set300
