M A G N U M6 KS W I T C H E S ,M N S - 6 KU S E RG U I D ESyntaxstart vlan=activate the VLAN configurationSyntaxsavesave the configuration (including the VLAN configuration)Syntaxedit id= [name=] port=[] -edit existing VLAN nameSyntaxshow vlan []display specific VLAN informationSyntaxset-port port= default id=sets the default VLAN id.For Magnum 6K family of switches, the default VLAN id is 1, unless changed using this commandSyntaxset-port port= filter status=enables or disablesthe VLAN filtering function.Syntaxset-portport=taggingid=status=untagged>defines whether the outgoing packets from a port will be tagged or untagged.Syntaxset-port port= join id=adds the specifiedport(s) to thespecified VLAN idSyntaxset-port port= leave id=releases a specific port from aVLANSyntaxshow-port [port=]shows all parameters related to tag vlan for the list of ports.If the port parameter is omitted, it will display all portsChapter 12 – Spanning TreeProtocol (STP)Syntaxshow stp -regardless of whether STP is enabled or disabled (default) thiscommand lists the switch’s full STP configuration, including general settings and port settingsSyntaxstp– STP Configuration modeSyntaxstp - Start (Enable) or stop (Disable) STPSyntaxpriority [port=] value=<0-255 | 0-65535> -specifies the port orswitch level priority. When a port(s) are specified the priority is associated with ports and their value is 0-255. If no ports are specified, then the switch (bridge) priority is specified and its value is 0-65535Syntaxcost port= value=<0-65535>- cost is specific to a port and the port(s)have to be specified292
