U P D A T I N G S O F T W A R E – S T E P 2347This will save the file 6kconfig-10.11 to the specified IP address (192.168.10.99) in thedefault TFTP folder.Using FTP would be the same as Figure 12, except replace 'mode=tftp' with 'mode=ftp'In some situations (e.g. routed networks), TFTP or FTP services may beblocked. Check for network connectivity (using the ‘ping’ command). If theconnectivity is OK, please contact your system or network administrator tounblock FTP or TFTP packets. If that is not possible, the alternative thenis to locate the Magnum 6K switch and update the MNS-6K softwarethrough the serial port as described in this document.Next steps1) Upload the updated MNS-6K software and reboot the switch. This is described instep 3.2) (Optional step) Reload the saved configuration. This is described in step 4.
