U P D A T I N G M N S - 6 K – S T E P 1Step11. Getting StartedDecide which version to use…..his document describes how to upgrade the MNS-6K software on a Magnum 6Kswitch. The methods described for updating the MNS-6K software are either locallyat the console port on the Magnum 6K switch or remotely over the network usingFTP or TFTP. This step involves getting ready with the necessary software andhardware tools as well as deciding on which MNS-6K software version to update to.TDepending on the update process (update through the serial/console port orremotely through the network), it would be best if the necessary tools listedbelow are available, tested and working before you start.For serial port updates directly through the serial/console port7) A female-female null modem cable. This cable is available from GarrettCom, Inc.as well as from LANstore, Inc. (http://www.lanstore.com)8) Serial port – if your PC does not have a serial port, you may want to invest in aUSB to serial converter. This is again available from LANstore or fromGarrettCom. Alternately a USB to serial cable can also be used. This cable isavailable also available from LAN store or GarrettCom Inc.9) A PC (or a workstation/computer) with a terminal emulation program such asHyperTerminal (included with Windows) or Teraterm-pro or other equivalentsoftware. Make sure that the software supports Xmodem protocol10) Enough disk space to store and retrieve the configuration files as well as copysoftware files from GarrettCom. We recommend that at least 15MB of diskspace is available for this purpose11) Manager level account name and password of the switch being upgraded12) Connection to the Internet. Make sure the connection does not block ftp filetransfersFor remote updates over the network1) A PC (or a workstation/computer) with a FTP as well as TFTP server software.This software is widely available as a free download on the Internet. If you needassistance in finding one, contact GarrettCom tech support at (510) 438-9071,email – support@garrettcom.com336