M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D EMagnum6K25(user)##FIGURE 11 - Changing the privilege levels for a userIn this example, user ‘peter’ was modified to Operator privileges.Modifying Access PrivilegesUser access allows the network administrators to control as to who has read and writeaccess and for which set of command groups. The command groups are defined as the setof commands within a specific function such as VLAN, Access privileges (as described inthis section), user ids and managing those and more. Further, administrators can alsocontrol as to what protocols are used by users (e.g. web or SSH but not telnet).To controlaccess privileges, the commands used areSyntax useraccess user= service= - definesthe services available to the user to access the device for modifying the configurationSyntax useraccess user= group= type=
- set read or write access for the command groupSyntax useraccess groups – displays the current groupsWhereuser= specifies the user idservice= specifies which service (telnet or web) the user has access to. specifies whether the services are allowed or not allowedgroup=list – specifies which group the user belongs togroups – specifies the groups the user has access to. The groups are defined as system,user, access, device, port, vlan, portsec, ps, mirror, lacp, stp, igmp, software, file,debugtype= - specifies whether the user has authority to change theconfiguration or notMagnum6K25# userMagnum6K25(user)## useraccessUsageuseraccess user= service= useraccess user= group= type=
useraccess groupsMagnum6K25(user)## add user=peter level=2Enter User Password : *****Confirm New Password : *****32
