Kenwood TK-2170 Series Function Reference

Also see for TK-2170 SERIES: Service manual Instruction manual Instruction manual Specifications Service manual

20 FLEETSYNC98 Index Contents Confidential FUNC (K)/Ver. 1.0120.6.2 Caller ID StackCaller ID Stack can be used to store IDs of the callers toStack Memory.A maximum of 3 Call IDs can be stored. The transceivercan also store a maximum of 9 received messages(Status Message + Short Message).A user can respond to the displayed Caller ID by pressingthe PTT switch after the transceiver enters Caller IDStack Mode.When the transceiver receives a call with FleetSync ID,the “ ” icon blinks to notify a user that the ID is stored.The user can check stored FleetSync IDs when thetransceiver enters Stack Mode.The method to store a Caller ID varies corresponding toStores the Latest Received Messages configuration.(Refer to 20.6.1 Stores the Latest Received Messages onpage 97.)Caller ID Stack can be configured to be enabled ordisabled by using KPG-101D. Configuration using KPG-101D• Configuring the Caller ID Stack (Refer to FPRG6.12.2 General 2 Tab - Caller ID Stack.)20.6.3 Message MemoryMessage Memory can be used to stack Caller IDs, StatusMessages and Short Messages even if the transceiver isturned OFF.The transceiver can be configured to store messages byusing KPG-101D. Configuration using KPG-101D• Configuring the Message Memory (Refer to FPRG6.12.2 General 2 Tab - Message Memory.)20.7 Configuring FleetSyncThe following FleetSync functions can be configured byusing KPG-101D:• Fleet/ ID (Own)• Unit Encode Block• FleetSync Baud Rate• Message Display Type• PC Interface Protocol• Manual Dialing• Selective Call Alert LED• Interfleet Call• Group ID• Auto Reset Timer• Alert Tone (Individual Call)• Alert Tone (Other Selective Calls)• Alert Tone (Paging Call)• Alert Tone (Status Message Call / Short MessageCall)• Alert Tone (Emergency Response Call)• Unit ID Serial Output• GTC Count• Number of Retries• Transmit Busy Wait Time• Maximum ACK Wait Time• ACK Delay Time• Transmit Delay Time (Receive Capture)• Data Transmit Modulation Delay Time• Random Access (Contention)• Data Transmit with QT/DQT