Kenwood TK-2170 Series Function Reference

Also see for TK-2170 SERIES: Service manual Instruction manual Instruction manual Specifications Service manual

21 SCANFUNC (K)/Ver. 1.01 Confidential Contents Index 111Note: The transceiver does not execute Scan Delete/Add even ifthe Scan Del/Add key is pressed during the scan. The transceiver can execute Scan Delete/Add only when thetransceiver pauses scanning while List is configured forScan Type. A zone cannot be added to or deleted from the Scan List ifSingle is configured for Scan Type. Configuration using KPG-101D• Assigning functions to the PF keys (Refer toFPRG 6.8 Key Assignment.)21.6.2 Scan List (TK-3173 only)Scan List can be used to execute the List Scan for eachzone.Scan List Table can be configured if Scan List is enabled.Scan List can be configured to be enabled or disabled byusing KPG-101D.Note: Scan List is available if List Scan is configured for ScanType. Configuration using KPG-101D• Configuring the Scan List (Refer to FPRG 6.2.11Scan List.)21.6.3 Scan List Table (TK-3173 only)Scan List Table can be used to select the target zone forList Scan. The Zone checkbox of the target zone mustbe checked to execute the List Scan. Configuration using KPG-101D• Configuring the Scan List Table (Refer to FPRG6.2.14 Scan List Table Window.)21.6.4 Priority/ Priority Zone-channelPriority Zone-channel can be used to configure the Zone-channel having high priority. The following functions canbe configured for Priority.Table 21-6 Priority OperationNote: Priority Zone-channel cannot be configured if “Selected” isselected from the Priority dropdown list. Transceiver Operationz Configuring the Priority Channel1. Select the channel to be configured as PriorityChannel.2. Press and hold the Scan key for 2 seconds.The transceiver enters Priority-channelConfiguration Mode and the “ ” icon blinks.3. Press the [S] key.The selected channel is configured as PriorityChannel and the channel name or numberappears on the display.The “ ” icon stops blinking.Priority OperationNone Does not configure the Priority Channel.FixedThe channel configured for the Priority Zone-channel configured by using KPG-101D is usedas Priority Channel.SelectedThe Selected channel is configured for PriorityChannel. Priority cannot be configured by usingKPG-101D.OperatorSelectableThe channel selected by a user is configured as aPriority Channel. The transceiver enters Priority-channel Configuration Mode when the Scan key ispressed and held for 2 seconds.