Kenwood TK-2170 Series Function Reference

Also see for TK-2170 SERIES: Service manual Instruction manual Instruction manual Specifications Service manual

14 CONVENTIONAL GROUPFUNC (K)/Ver. 1.01 Confidential Contents Index 4314.2.14 Scan AddScan Add can be used to add a channel to the Scan List.Scan Add can be configured by using KPG-101D. Configuration using KPG-101D• Configuring the Scan Add (Refer to FPRG 6.4.16Scan Add.)14.2.15 Beat ShiftBeat Shift eliminates internal harmonics caused by thetransceiver’s oscillators. (Refer to 1.8 Beat Shift on page5.)Beat Shift can be configured to be enabled or disabled byusing KPG-101D. Configuration using KPG-101D• Configuring the Beat Shift to be enabled ordisabled for each channel (Refer to FPRG 6.4.17Beat Shift.)14.2.16 CompanderCompander can be used to improve the quality of thereceived audio. (Refer to 1.7 Compander on page 5.)Compander can be configured to be enabled or disabledby using KPG-101D. Configuration using KPG-101D• Configuring the Compander to be enabled ordisabled for each channel (Refer to FPRG 6.4.18Compander.)14.2.17 DataA channel can be configured to be used for datacommunications or voice communications. If the Datacheckbox is checked, the channel is used for datacommunications.Data can be configured by using KPG-101D. Configuration using KPG-101D• Configuring the Data (Refer to FPRG 6.4.19Data.)14.2.18 Voice ScramblerVoice Scrambler can be used to scramble speech toallow users to engage in private communications. (Referto 26 Voice Scrambler on page 124.)Voice Scrambler can be configured to be enabled ordisabled by using KPG-101D. Configuration using KPG-101D• Configuring the Voice Scrambler (Refer to FPRG6.4.20 Voice Scrambler.)14.2.19 Scrambler CodeScrambler Code can be configured. (Refer to 26 VoiceScrambler on page 124.)Two types of scrambler are available. The transceivercan be configured to use a built-in scrambler or anoptional scrambler to be installed in the transceiver. Asfor Scrambler Code configuration, a user can configurethe Scrambler Code that may be required for the optionalscrambler board.Scrambler Code can be configured by using KPG-101D.Note: Scrambler Code cannot be used with a built-in scrambler. Configuration using KPG-101D• Configuring the Scrambler Code (Refer to FPRG6.4.21 Scrambler Code.)