Kenwood TK-2170 Series Function Reference

Also see for TK-2170 SERIES: Service manual Instruction manual Instruction manual Specifications Service manual

20 FLEETSYNCFUNC (K)/Ver. 1.01 Confidential Contents Index 87z When the Status Message is properly sentto the receiving party:“COMPLETE” appears on the display.z When the Status Message is not properlysent to the receiving party:“NO REPLY” appears on the display.z When the channel is busy and thetransceiver cannot send the StatusMessage:“BUSY” appears on the display.z When canceling the Status Messagetransmission:Press the Side 1 key while “SEND DAT”appears on the display.“CANCEL” appears on the display and thetransmission is cancelled.z Sending a Status Message with Manual Dialing1. Press the Status or Selcall + Status key.The transceiver enters Status List SelectionMode.The transceiver enters Status List SelectionMode if the [S] or [*] key is pressed after theSelcall + Status key is pressed and the SelcallID is selected. (Refer to 20.2.1 Making aSelcall on page 82.)2. Press and hold the [S] or [*] key for 1 second.The transceiver enters Status Code EntryMode.The last used status appears on the display.No code appears on the display when thetransceiver enters Status Code Entry Mode forthe first time.3. Enter the code.• Using the Selector *1Select a code using the Selector.Press the [C>] key after selecting the code.*1 If the List Selection Key (Selector) is enabled.• Using the keypadEnter the code using the [0] to [9] keys.• Deleting the Entered Code:Press the [A] or [#] key.The selected character will be deleted.Press and hold the [A] or [#] key.All characters will be deleted.4. Press the PTT switch or Side 2 key.The transceiver sends the Status Message.