Kenwood TK-2170 Series Function Reference

Also see for TK-2170 SERIES: Service manual Instruction manual Instruction manual Specifications Service manual

18 DTMFFUNC (K)/Ver. 1.01 Confidential Contents Index 7118.3.6 Transpond (Conventional)This function allows the caller to confirm that the receivingparty has received the individual call code.Transceiver operation when the receiving party receivesthe code can be configured.Transpond can be configured by using KPG-101D.(Refer to FPRG 6.10.2 Decode Tab - Transpond(Conventional).)Note: Transpond is available in Conventional Group.18.3.7 Code (Trunking) (TK-3173 only)The standby DTMF code for receiving an individual call inTrunking System can be configured.The transceiver executes the operation configured forTranspond and Alert Tone if the DTMF code matches.The transceiver can communicate only with LTR ID.Code can be configured by using KPG-101D. (Refer toFPRG 6.10.2 Decode Tab - Code (Trunking).)Note: Code (Trunking) is available in Trunking System.18.3.8 Transpond/ Alert Tone(Trunking) (TK-3173 only)The transceiver executes Transpond/ Alert Tone if thecode matches in Trunking System. If the code matches,the transceiver executes the operation configured forTranspond and Alert Tone.Transpond and Alert Tone can be configured by usingKPG-101D. Below is a list of configuration items for AlertTone and Transpond.Table 18-4 Transpond/ Alert Tone OperationNote: The transceiver emits the alert tone after transponding whenboth Transpond and Alert Tone are configured at the same time. Alert Tone is delayed if the transmission of the Transpond isdelayed when the channel is being used while Clear ToTranspond is enabled in the Conventional Group. The transceiver stops emitting the alert tone if a key is pressedwhile the transceiver intermittently emits the alert tone when“Infinite” is selected for Special Alert Tone window > >Cycleedit box. The received tone is emitted first if the transceiverintermittently emits the alert tone. The matching status of DTMF is reset in the following conditions:Table 18-5 Conditions for Resetting DTMFMatching Status• The status of Transpond is reset in the followingconditions:Table 18-6 Conditions for Resetting TranspondConfiguration OperationOff Transceiver does not respond.Alert The transceiver multiplexes the TranspondTone and transmits the tone.ID CodeThe transceiver multiplexes the ID Codeconfigured for the receive channel andsends the code.Transpond Code The transceiver multiplexes the AutodialMemory 1 and sends the code.Ringing Tone The transceiver multiplexes the Ringingtone and transmits the tone.Configuration OperationAlert Tone The transceiver emits the configured AlertTone.TranspondThe transceiver transponds, multiplexesthe Transpond tone and transmits thetone.Operation ConditionPressing akeyIf one of the following keys is pressed:• Monitor key• Monitor Momentary key• Squelch Off key• Squelch Off Momentary key• Zone Up key• Zone Down key• Zone Up/Down key• CH/GID Up key• CH/GID Down key• CH/GID Up/Down key• Scan key• Home Channel key• Direct CH/GID 1 to Direct CH/GID 4 keysExpiration ofTimers When the Auto Reset Timer expires.Operation ConditionPressing akeyIf one of the following keys is pressed:• Monitor key• Monitor Momentary key• Squelch Off key• Squelch Off Momentary key• Zone Up key• Zone Down key• Zone Up/Down key• CH/GID Up key• CH/GID Down key• CH/GID Up/Down key• Scan key• Home Channel key• Direct CH/GID 1 to Direct CH/GID 4 keysTransmission When the PTT switch is pressed to transmit.