Kenwood TK-2170 Series Function Reference

Also see for TK-2170 SERIES: Service manual Instruction manual Instruction manual Specifications Service manual

18 DTMF74 Index Contents Confidential FUNC (K)/Ver. 1.01Table 18-11 Key Operation Transceiver Operationz Configuring and Changing the Autodial1. Press the Autodial Programming key.The list number 1 of the Autodial List appearson the display. No list number appears on thedisplay if the Autodial List is not configured.2. Select the Autodial List number to configure.“BLANK + List number” appears on the display.• Using the PF keysPress the [ or [C>] key.• Using the Selector *1Turn the Selector.*1 If the List Selection Key (Selector) is enabled.3. Press the [S] or [*] key.The list number is confirmed.4. Enter the List name using the Selector orkeypad.5. Press the [S] key after entering the character.The Autodial List Name is confirmed.6. Enter the DTMF code using the Selector orkeypad.7. Press the [S] key after entering the entire code.The writing confirmation window appears onthe display.“STORE” appears on the display if no data isstored in the memory.“OVERWRT” appears on the display if dataexists in the memory.8. Press the [S] or [*] key.Data is written to the memory and the AutodialList Selection window appears on the display.Key OperationSelector Increments or decrements the enteredcharacter.Side 1 Exits from the current mode.[S] Moves to next item.[A] Press: Deletes a character.Hold: Deletes all characters[ -[C>] Confirms the entered character.Side 2 -[0] (Space)/ 0[1] 1[2] A/ B/ C/ 2[3] D/ E/ F/ 3[4] G/ H/ I/ 4[5] J/ K/ L/ 5[6] M/ N/ O/ 6[7] P/ Q/ R/ S/ 7[8] T/ U/ V/ 8[9] W/ X/ Y/ Z/ 9[*] Confirms the entered character.[#] Press: Deletes a character.Hold: Deletes all charactersPTT switch The transceiver exits from the currentmode and transmits.