Kenwood TK-2170 Series Function Reference

Also see for TK-2170 SERIES: Service manual Instruction manual Instruction manual Specifications Service manual

20 FLEETSYNCFUNC (K)/Ver. 1.01 Confidential Contents Index 10120.7.10 Auto Reset TimerAuto Reset Timer can be used to reset the LED, AlertTone, Monitor, and LCD to the previous statuses after acertain period elapses.The following functions can be configured for the AutoReset Timer.Table 20-18 Auto Reset Timer OperationTable 20-19 Transceiver Operation after theAuto Reset Timer expires Configuration using KPG-101D• Configuring the Auto Reset Timer (Refer to FPRG6.12.2 General 2 Tab - Auto Reset Timer.)20.7.11 Alert Tone (Individual Call)The Alert Tone (Individual Call) sounds when thetransceiver receives an individual call. One of 8 tonesconfigured in Special Alert Tone can be selected for theAlert Tone (Individual Call).Note: If Infinite is configured in the Special Alert Tone window >Cycle edit box and the Auto Reset Timer (Alert) checkboxis checked, the transceiver stops emitting this tone when theAuto Reset Timer expires. Configuration using KPG-101D• Configuring the Alert Tone (Individual Call) (Referto FPRG 6.12.2 General 2 Tab - Individual Call(Alert Tone).)20.7.12 Alert Tone(Other Selective Calls)The Alert Tone (Other Selective Calls) sounds when thetransceiver receives a Selcall. One of 8 tones configuredin Special Alert Tone can be selected for the Alert Tone(Other Selective Calls).Note: The Alert Tone (Other Selective Calls) is used for Group Call,Fleet Call, Supervisor Call and Broadcast Call. If Infinite is configured in the Special Alert Tone window >Cycle edit box and the Auto Reset Timer (Alert) checkbox ischecked, the transceiver stops emitting this tone when the AutoReset Timer expires. Configuration using KPG-101D• Configuring the Alert Tone (Other Selective Calls)(Refer to FPRG 6.12.2 General 2 Tab - OtherSelective Calls (Alert Tone).)20.7.13 Alert Tone (Paging Call)The Alert Tone (Paging Call) sounds when thetransceiver receives a paging call. One of 8 tonesconfigured in Special Alert Tone can be selected for theAlert Tone (Paging Call).Note: If Infinite is configured in the Special Alert Tone window >Cycle edit box and the Auto Reset Timer (Alert) checkboxis checked, the transceiver stops emitting this tone when theAuto Reset Timer expires. Configuration using KPG-101D• Configuring the Alert Tone (Paging Call) (Refer toFPRG 6.12.2 General 2 Tab - Paging Call (AlertTone).)20.7.14 Alert Tone (Status MessageCall/ Short Message Call)The Alert Tone (Status Message Call/ Short MessageCall) sounds when a Status Message or Short Messageis stacked. One of 8 tones configured in Special AlertTone can be selected for the Alert Tone (Status MessageCall/ Short Message Call).Note: If Infinite is configured in the Special Alert Tone window >Cycle edit box and the Auto Reset Timer (Alert) checkboxis checked, the transceiver stops emitting this tone when theAuto Reset Timer expires.Configuration OperationOff The Auto Reset Timer does not activate.1 to 300 sLED, Alert Tone, Monitor, and the LCD return totheir previous statuses when configured timeelapses.Item OperationLED The Selective Call Alert LED turns Off when theAuto Reset Timer expires.Alert Tone The transceiver stops intermittently emitting theAlert Tone when the Auto Reset Timer expires.Monitor The matching status of Selcall is reset when theAuto Reset Timer expires.LCD The previous CH/GID appears on the displaywhen the Auto Reset Timer expires.