Troubleshooting 8-3LAMPSThe following describes lamps on the server and their indications. See Chapter 2 for each location.LAN ACCESS Lamp ( )The LAN ACCESS lamp is lit green when the server is connected to LAN. The lamp blinks whilethe server is accessed through the LAN (for packet transmission).STATUS Lamp ( )The STATUS lamp stays lit in green when the server is in successful operation. When theSTATUS lamp is unlit or lit/flashing in amber, it indicates that the server has failed.The following table lists indications of the STATUS lamp, descriptions, and actions to take.NOTES: If the server has the NEC ESMPRO or Off-line Maintenance Utilityinstalled, you can view the error log to identify the cause of atrouble. To cycle power to the server, shut down the server from the OS toand reboot it, if available. If the shutdown from the OS is notavailable, disconnect and connect the power cord to reboot theserver.