F-14 Installing Windows 2000USB 2.0 DriverUSB 2.0 Driver is pre-installed. When restoring the system or re-installing the system, the driver isautomatically installed in the process of updating the system.Installing SCSI Controller Driver (N8103-65F/75)If you utilize SCSI controller driver (N8103-65F/75), install it according to the following procedure:1. Start [Device Manager] from [Start] menu → [Control Panel]→ [Administrative Tools]→[Computer Management].2. Double-click the SCSI Controller driver which Device Manager lists as unknown device.3. Click [Update Driver].4. When the "Update Device Driver Wizard" appears, select "Install from a list or specificlocation [Advanced]" and click [Next].5. Select "Don't search. I will choose the driver to install" and click [Next].6. Click [Have Disk..].7. Insert "Windows 2000 OEM-DISK for EXPRESSBUILDER" into the floppy disk drive,enter "a:\" into "copy manufacturer's file from:" and click [OK].8. Specify the following driver and click [Next].– [INITIO INI-A10XU2W PCI SCSI Controller](When N8103-65F board is installed.)– [Adaptec Ultra320 SCSI Cards (Win2000](When N8103-75 board is installed.)The installation of the driver is completed.Restart the system according to the message appeared on the screen.Installing SCSI Controller Driver (N8103-56F/95)If you utilize SCSI controller driver (N8103-56F/95), update your system with NECEXPRESSBUILDER CD-ROM attached to your system.The SCSI controller driver will be installed automatically.
