4-2 Configuring Your ServerStarting SETUP UtilityA few seconds after powering on, the following message appears at bottom left on the screen.Press to enter SETUPPress F2 to start the SETUP utility and display its Main menu.If you have previously set a password with the SETUP utility, the password entry screen appears.Enter the password.Enter CURRENT password:[ ]Up to three password entries will be accepted. If you fail to enter the password correctly for threeconsecutive times, the server halts. (You can no longer proceed.) Power off the server.NOTE: The server is provided with two levels of password:Administrator and User. With the Administrator password, you canview and change all system parameters. With the User password,system parameters available for viewing and changing are limited.
