Upgrading Your Server 9-155.25-inch DeviceThe server contains four slots in which backup devices including CD-ROM and magnetic tapedrives can be installed.IMPORTANT: The server can include a maximum of two devices: two half-heightdevices, or one half-height device and one full-height device. Set the SCSI termination of the 5.25-inch device to be installed toOFF and the SCSI ID to a value which is not duplicated orcorrupted with that of any other device. Refer to thedocumentation coming with each of the devices for how to set thevalues. For half-height device, first install a device in slot 1. Then installanother device in slot 2.For full-height device, install the device to the slots 2 and 3. To install N8151-13ACF of the built-in DAT collective type [DDS-3], use the power blanch cable installed on the device.Slot 3Slot 2Slot 1Standard ATAPICD-ROM drive
