4-10 Configuring Your ServerMemory Configuration submenuOption Parameter Description Your SettingDIMM 1A/1B/2A/2B NormalNot installedDisabledDisplays the current status of thememory bank. Disabledindicates that a DIMM in thebank has failed and the entirebank has been disabled.Extended Memory Test 1MB[1KB]Every locationDisabled"1MB" indicates that the memorytest is done in the unit of 1MB."1KB" indicates that the memorytest is done in the unit of 1KB."Every location" tests everymemory location. "Disabled"indicates that only memoryinitialization is done.Memory Retest [Disabled]EnabledCauses BIOS to retest allmemory on the next boot.Memory Remap Feature Disabled[Enabled]If enabled, BIOS allows theremapping of overlapped PCImemory above the total physicalmemory.Memory Sparing [Disabled]EnabledEnables or disables the sparememory feature.[ ]: Factory-setBootOption Parameter Description Your SettingBoot SettingsConfigurationN/A Displays Boot SettingsConfiguration submenu.Boot Device Priority N/A Displays the Boot Device Prioritysubmenu.Hard Disk Drives N/A Displays the Hard Disk Drivessubmenu. In the submenu,specify the 1st drive from theoption.Removable Drives N/A Displays the Removable Drivessubmenu. In the submenu,specify the 1st drive from theoption.CD/DVD Drives N/A Displays the CD/DVD Drivessubmenu. In the submenu,specify the 1st drive from theoption.[ ]: Factory-set