Upgrading Your Server 9-19PCI BoardThe server contains six slots into which PCI boards can be inserted.IMPORTANT: Any PCI board is easily affected by static electricity.Handle a PCI board after making your body contact with a metallicframe section of the server to discharge the static electricity on yourbody. Do not make bare hands contact with terminals and componentson the PCI board. In addition, do not put the PCI board on a deskdirectly. See "Static Precautions" in this chapter for details of thestatic electricity.NOTE: When a PCI board is installed, removed, or removed from thepresent slot and then installed in another slot, modify the detailedsettings including the interrupt lines (IRQ) by using the BIOS setuputility SETUP if necessary. See Chapter 4 for the settings of theinterrupt line states and I/O spaces at the shipment of the server.Mother board* Do not install a set of PCI boards providing a specific function to extend over both the 64-bit and32-bit PCI buses.PCI #5, 32-bit/33MHz, PCIPCI #4, PCI EXPRESS (x4)PCI #3, 32-bit/33MHz, PCIPCI #2, 64-bit/66MHz, PCI-XPCI #1, 64-bit/66MHz, PCI-X