Installing Windows Server 2003 x64 Editions D-11Network DriverSpecify the details of network driver.One standard network driver that is mounted will be installed automatically, but the link speed andDuplex mode need to be specified manually.[When PROSet is not installed]1. The [Local Area Connection Properties] dialog box appears.* The procedure in the case of the standard start menu1. Click Start menu, Click [Control Panel], Click [Network Connections], and Click[Local Area Connection].* The procedure in the case of the classic start menu1. Click Start menu, Click [Settings] and Click [Network Connections].The [Network Connections] dialog box appears.2. Right-click [Local Area Connection] and click [Properties] from pop-up menu.2. Click [Configure].The property dialog box for network adapter appears.3. Click the [Advanced] and specify the [Link Speed & Duplex] value the same as the valuespecified for HUB.4. Click [OK] on the property dialog box for network adapter.[When PROSet is installed]1. Open the [Device Manager]2. Double Click [(Network Adapter Name)] in the list.3. Click the [Link] and specify the [Link Speed & Duplex Settings] value the same as thevalue specified for HUB.4. Click [OK].Also, add or delete any protocols and services if necessary.You can operate the process on the property dialog box for local area network which can beappeared from [Network and Dial-up Connection].NOTE: We recommend you to add [Network Monitor] at [AddingServices]. [Network Monitor] can monitor the frame (or the packet) thatthe computer installing [Network Monitor] sends or receives. This toolis valuable when analyzing network trouble. For information on how toinstall the tool, see the "Setting for Solving Problems" described later inthis chapter.