Troubleshooting 8-33OFF-LINE MAINTENANCE UTILITYThe Off-line Maintenance Utility is an OS-independent maintenance program. When you areunable to start the OS-dependent NEC ESMPRO to troubleshoot a problem, the Off-lineMaintenance Utility can be used.IMPORTANT: The Off-line Maintenance Utility is intended for use of your salesagent. The NEC EXPRESSBUILDER CD-ROM and the Off-lineMaintenance Utility Bootable FD you have created contain a filethat describes operation of the utility, but do not attempt to use theutility by yourself. Contact your sales agent and followinstructions. Starting the Off-line Maintenance Utility disables any access from aclient to the server.Starting the Off-line Maintenance UtilityThe Off-line Maintenance Utility may be started in the following ways. From the CD-ROMSet the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive and reboot thesystem.After the menu is displayed on the screen, select "Tools" - "Off-line Maintenance Utility".The Off-line Maintenance Utility program starts from the CD-ROM. From the floppy diskSet the Off-line Maintenance Utility Bootable FD in the floppy disk drive and reboot thesystem.The Off-line Maintenance Utility program starts from the boot disk.The Off-line Maintenance Utility Bootable FD is created by selecting "Tools" - "CreateSupport FD" on the NEC EXPRESSBUILDER. Manual start (by pressing F4)When the Off-line Maintenance Utility is installed, press F4 while the start-up screen ofthe server is on screen. The Off-line Maintenance Utility starts from the hard disk.
